GRIPiTE V50 – High performance LVT adhesive, 20 Litre

GRIPiTe V50


High performance LVT adhesive

GRIPiTe V50 is a specialised LVT (Luxury Vinyl Tile or Plank) adhesive with high solids, hard-set high performance characteristics, specifically designed for the installation of LVT‘s onto cementitious substrates such as self-levelled screeds. The long working time, coupled to the rapid hard set make the product best suited for use on floor coverings with moderately high dimensional change coefficients. GRIPiTe V50 is a low odour, solvent free, product that has a Zero VOC content making it suitable for installations in ‘Green’ buildings and also for installations in partially occupied buildings. The product also has wide temperature tolerance making it suitable for use in many underfloor heating applications.

 

Surface Preperation


The substrate must be sound, free of loose granular particles, excess dust and be dry. Any contamination of old adhesive, oils or wax, or any substance that can inhibit the adhesion of the adhesive to the substrate must be removed. Comply with the flooring manufacturer’s specification for maximum screed moisture levels.

We recommend that SANS 10070:2012 be complied with.

Technical Data


Product Base Type:
Unique Vinyl terpolymer
Appearance:
Off-white paste
Coverage:
200-300g/m² (dependent on the trowel notch size and substrate smoothness)
Application Temperature:
15ºC minimum – for screed and ambient.
Drying Time (Open Time):
10 – 45 minutes* (dependent on application)
Working Time:
40 – 60 minutes* (dependent on climatic conditions)
Trafficable after 24 hours* – Final strength after 72 hours*

*Note – Times are based on 23ºC at 65% RH and depend on covering and application.

General


Shelf Life

12 months minimum when stored in original containers in a clean dry environment at ambient temperature.

Warning


Safety goggles and gloves should be worn to protect the eyes and skin from accidental exposure. In the event of eye contamination, the eyes must immediately be washed out with copious amounts of clean water, and medical assistance sought. It is recommended that overalls be worn to minimise soiling of clothing.

Application


Please refer to product datasheet.

Clean Up


Before it has set GRIPiTe®V50 can be washed off with soapy water. Once dry, thinners or similar will be effective.

Additional Information


Surface Preperation

The substrate must be sound, free of loose granular particles, excess dust and be dry. Any contamination of old adhesive, oils or wax, or any substance that can inhibit the adhesion of the adhesive to the substrate must be removed. Comply with the flooring manufacturer’s specification for maximum screed moisture levels.

We recommend that SANS 10070:2012 be complied with.

Technical Data

Product Base Type:
Unique Vinyl terpolymer
Appearance:
Off-white paste
Coverage:
200-300g/m² (dependent on the trowel notch size and substrate smoothness)
Application Temperature:
15ºC minimum – for screed and ambient.
Drying Time (Open Time):
10 – 45 minutes* (dependent on application)
Working Time:
40 – 60 minutes* (dependent on climatic conditions)
Trafficable after 24 hours* – Final strength after 72 hours*

*Note – Times are based on 23ºC at 65% RH and depend on covering and application.

General

Shelf Life

12 months minimum when stored in original containers in a clean dry environment at ambient temperature.

Warning

Safety goggles and gloves should be worn to protect the eyes and skin from accidental exposure. In the event of eye contamination, the eyes must immediately be washed out with copious amounts of clean water, and medical assistance sought. It is recommended that overalls be worn to minimise soiling of clothing.

Application

Please refer to product datasheet.

Clean Up

Before it has set GRIPiTe®V50 can be washed off with soapy water. Once dry, thinners or similar will be effective.